skip to Main Content

3D printing is cutting edge. There's always something new to learn.

Welcome to the Deltaprintr support page where you can find a variety of topics & articles to help you get started with 3D printing. Wether you’re a beginner looking to delve into the 3D world or an expert looking to sharpen your skills, we’re here to help.


Get familiar with the world of 3D printing before you start.


Setup and learn about the various parts of  your printer.


Software setup, settings and how to prepare your files for printing.

print fail

Learn about various potential print issues and how to overcome them.


Learn the tricks of the trade on how to post-process your prints.

(Coming soon)


Understand how to keep your printer in pristine running condition.

(Coming soon)


Learn how to update the firmware on the electronics board.

PEEK, 0.4mm brass nozzle, carriage wheels and bearings.

Check out the various mods and upgrades possible with your printer.


Although there are many open-source software programs available on the internet for you to use with your 3D printer, we recommend using Cura.

Note: When starting up the program, you will see a popup asking if you would like to update to the newer version, click NO. The latest version does not support a delta styled printer.

Print test files

We recommend using the 3D Benchy as a “benchmark” for testing your printer’s print settings and resolution.

Cura print settings

We test our printers on a daily basis and fine tune our print settings to make sure our customers get perfect prints every time.

Cura Settings Download

(Coming soon)
Check the software page for download links.


This is the factory default firmware that is loaded on the electronics of your Deltaprintr 3D printer. Be sure to read this post on how to upload the firmware correctly.

×Close search