No products in the cart.
The Delta Go features anodized aluminum and powder coated steel construction with numerous improvements to produce amazing prints.
Small, light weight, compact effector.
Our powerful all-metal hotend is capable of printing any material. Allowing for optimal cooling and a smaller heat zone for faster prints. Warm up times are also significantly faster, reaching 200C under 30 seconds with our brand new heater design. In addition, we’ve added a powerful cooling fan to prevent warping and ensure a beautiful surface finish on your prints. You can also switch out nozzles for more fine micro nozzles to print highly detailed designs.
Precision crafted aluminum bed
The Delta Go’s aluminum bed is precisely crafted to 0.01mm tolerance so your first layer sticks to the bed really well and looks beautiful too.
Advanced Circuitry
Our customized smoothieware firmware combined with a powerful 32 bit NXP Chip processor, generates fast and precise prints.
Auto Leveling
No need to fuss with manual calibration. The Delta Go features auto-leveling up to 0.03mm precision to ensure your first layer sticks to the bed every time.
Smart Notifications
No need to fuss with manual calibration. The Delta Go features auto-leveling up to 0.03mm precision to ensure your first layer sticks to the bed every time.
PRINTING
PRINT TECHNOLOGY
FUSED FILAMENT FABRICATION
LAYER RESOLUTION
100 MICRONS
FILAMENT DIAMETER
1.75 MM [0.069 IN]
FILAMENT COMPATIBILITY
ANY TYPE OF MATERIAL
NOZZLE DIAMETER
0.4 MM [0.015 IN]
PRINT FILE TYPE
STL, OBJ
TEMPERATURES
AMBIENT OPERATING TEMPERATURE
15-26°C [60-78°F]
STORAGE TEMPERATURE
0-38°C [32-100°F]
SOFTWARE
SOFTWARE BUNDLE
CURA
SUPPORTED FILE TYPES
STL, OBJ
OPERATING SYSTEMS
WINDOWS (7+)
MAC OS X (10.7+)
MECHANICAL
CONSTRUCTION
POWDER-COATED STEEL & ALUMINUM
BUILD SURFACE
ALUMINUM
STEPPER MOTORS
1.8° STEP ANGLE WITH 1/16
MICRO-STEPPING
XY POSITIONING PRECISION
11 MICRONS [0.0004 IN]
Z POSITIONING PRECISION
2.5 MICRONS [0.0001 IN]
SIZE AND WEIGHT
PRODUCT DIMENSIONS
21.8 D X 40.6 H CM
[8.5 D X 15.9 H IN]
SHIPPING BOX
18 x 10 x 10 [IN]
PRODUCT WEIGHT
3.6 KG [8 LBS]
SHIPPING WEIGHT
(INCLUDES ACCESSORY KIT)
4.5 KG [10 LBS]
ELECTRICAL
POWER REQUIREMENTS
100–240VAC; 0.75-0.41A;
50–60 HZ; 100W
CONNECTIVITY
USB or SD Card
Filament Included
A roll of filament is included with the purchase of a Delta Go 3D Printer so you can get started printing right away!